Craftsman 320 Series Owner's Manual page 19

Detector can not
find the laser
The remote
control can not
operate the tool
AC/DC adapter
can not provide
electricity for the
rotary laser
1. It detects a red laser line
2. The detector is out of its
working range
3. Low voltage of the battery
1. The tool is shut off wholly
2. Low voltage of the battery
3. The remote control is out of
its working range
1. Weak connection of the
plugs
2. The mains supply is power
cut
1. This detector can only detect
green laser.
2. Make sure the distance
between tool and detector does
not exceed 200 feet.
3. Change with a new battery
1. Press the power button on the
tool first, and then use the remote
control to operate it.
2. Change with a new battery
3. Make sure the distance
between tool and remote control
does not exceed 100 feet.
1. Make sure the AC/DC adapter
is connected well with the tool
and the socket of mains supply.
2. Operate the tool with batteries.
19