Craftsman 320 Series Owner's Manual page 10

3. Press the power button to turn on the level.
4. Press the chalk line button to project a chalk line. Press once to project a longest
chalk line; twice to project a medium chalk line and three times to project a shortest
chalk line.
5. Align the laser beam to your target by pressing the left or right button.
You can get the chalk line either in the horizontal or vertical directions. Press the left
or right button to remove the projecting direction of the chalk line- you do not need to
move the tool and re-level it.
Using the remote control (see fig.8)
Description
The wireless remote control can operate your rotary level within a maximum distance
of 100 feet; the function of buttons on remote control is same as the buttons in
operation panel of the level except for the power button.
Fig.8
5
Power button of the rotary laser level: when the level is power on, push it to turn off
the level; the backlights of the vials will flash twice quickly showing all the circuits are
shut off wholly. Now the remote can not control the tool. To operate the remote control,
turn on the tool first.
Power button of the remote control: when the green rotary laser level is powered on,
push it to make the level enter sleeping mode, at this time the backlights of the vials
will flash once each two seconds to remind you that the tool has not been fully shut off.
You can wake up the level within two hours with remote control after you select "Sleep
mode". After two hours of time, the tool will automatically shut off totally. Then the
remote can not control the tool. To operate the remote control, turn on the tool with the
power button of the level first.
1
1. LED indicator
2
2. Power button.
3
3. Rotation button
4
4. Chalk line button
6
5. Left button
6. Right button
10