4. To get accurate detection, make sure the bubble of the round vial in the middle of
the circle mark.
CAUTION! Whenever use the mount base to secure the detector on a vertical
pillar, BE SURE the detector is connected tightly and the base is clamped firmly.
Fig. 15
Wall mount base for the green rotary laser level
Description
Fig.17
10
4
8
9
Using the wall mount base
Fig. 16
1.
Trough - Used for attaching the mount
2
base to beams on wall.
2.
Lock screw - Used for fixing the mount
3
base to beams on wall.
1
3.
Mounting hole - Used for hanging the
base from a nail or screw on a wall
2
4.
Secure screw - Used for fixing the
6
platform securely.
7
5.
Handle – Quick release or clamp of
the platform.
5
6.
Inch/Centimeter scale
7.
Platform pivots – Used for easy
storage of wall mount.
8.
5/8'' mounting thread screw – Used
for fixing rotary laser on the base
9.
Balance screw – Used for adjusting
the balance of the base.
10. Platform – Used for support of the
rotary laser.
14