Table of Contents
Advertisement
Installation
• Place the monitor on top of the cabinet/top plate and ensure it is stable.
• You may fasten the monitor to the cabinet using the securing kit.
• Take the camera and remove the plastic backing from the double sided tape-pads on the base of the unit. Place
the camera centrally, on top of the monitor close to the front. If the system has two monitors, place the camera
on the left monitor (where menus and incoming picture will be displayed).
I
NOTE
MPORTANT
T
HE CAMERA SHOULD BE ALIGNED WITH THE FRONT EDGE OF THE MONITOR TO ENSURE THAT THE
SIGNALS FROM THE REMOTE CONTROL
TANDBERG Videoconferencing System
.
14
IR-
SENSOR IN THE CAMERA CAN PICK UP
Advertisement
Table of Contents
