Mechanical Installation; Cooling; Mounting - Danfoss VLT Series Operating Instructions Manual

Mechanical Installation

5 Mechanical Installation

5.1 Cooling

NOTE
•
To provide cooling airflow, mount the unit to a
solid flat surface or to the optional back plate.
5 5
•
Top and bottom clearance for air cooling must be
provided. Generally, 100-225 mm is required.
•
Improper mounting can result in over-heating
and reduced performance.

5.2 Mounting

•
Mount the unit vertically.
•
Ensure that the strength of the mounting location
will support the unit weight.
•
Mount the unit to a solid flat surface to provide
cooling airflow.
•
Improper mounting can result in over heating
and reduced performance.
•
Use the slotted mounting holes on the unit for
wall mounting.
12
®
VLT ISD Power Supply Module Operating Instructions
®
MG75H102 - VLT is a registered Danfoss trademark