Introduction - Danfoss VLT Series Operating Instructions Manual

®

Introduction

VLT ISD Power Supply Module Operating Instructions
4 Introduction
The power supply module delivers the required DC 300 V
power supply to the ISD servo system. The DC 300 V
power supply is delivered to all servo drives installed in
the system via a hybrid cable. It is a controlled power
supply module, whereby the maximum rated output
4 4
current is 10 A, and the rated power is 3.0 kW. The LEDs
on the front of the unit display the operating status and
warnings.
CAUTION
The power supply module has an IP-rating of IP20. It is
only designed for use within a control cabinet. The unit
may be damaged if exposed to fluids.
®
MG75H102 - VLT is a registered Danfoss trademark 11