Connection Cables; Accessories - Magnescale SR27A-AZ Series Instruction Manual

7-2. Connection Cables

Model name
Item
Conduit
Cable sheath
Cable length
Terminal processing
Protective design grade
Operating temperature range
Storage temperature range
Mass
Recommended minimum
bending radius (when there is
repeated bending)
Recommended minimum
bending radius (when there is
no repeated bending)
Dimensions
Th e information here is subject to change without notice. When designing machines, please request the
latest specifi cations from your nearest sales representative.

7-3. Accessories

M4 × 10
M4 × 20
M8 × 16
M4
Spacer: t = 0.1 mm
Spacer: t = 1.0 mm
Accuracy table
Instruction Manual
18
(E)
CH22-XXXCS
Included (stainless steel)
No conduit is used 100 m from the
scale head side connector
PU
(Polyurethane)
(Green)
3, 5, 10, 15 m (standard product),
Supports only 0.1 m units from 1 to 30 m (special-order product)
RJ45 connector made by Yamaichi Electronics (or M12 connector made by
Phoenix Contact when extended)
IP67 (RJ45 connector excluded)
0 to +50°C
–20 to +55°C
Approx. 0.1 kg + 0.15 kg/m
75 mm
Conduit unit: 40 mm, No conduit unit: 35 mm
See section 8. "Dimensional Diagrams."
Hex. socket-head cap screws
Hex. socket-head cap screws
Hex. socket-head cap screws
Hex. nuts
CH22-XXXNS
None
PU
(Polyurethane)
(Green)
2 (For intermediate foot plate installation)
2 (For scale head installation)
2 (For scale installation)
2 (For scale head rear surface installation)
3
1
1
1
SR27A-AZ Series, CH22 Series