Output Signal (Serial Output); Signal Specifi Cations; Controller Connection Specifi Cations - Magnescale RU97-2048 Z Series Instruction Manual

4. Output Signal (Serial Output)

4-1. Signal Specifi cations

Th is product performs data communication with a controller using SIEMENS DRIVE-CLiQ protocol.
[When seen from above]
Addition count when the scale
shaft is rotating counter-clockwise.

4-2. Controller Connection Specifi cations

When connecting to a controller, be sure to follow the connection procedure of the controller manufacturer.
(See section 7, "Connections with a Controller.")
6
(E)
RU97-2048 Z Series