Pip Placing; Vnc Settings - TANDBERG 1500 MXP User Manual

TANDBERG 1500 MXP

4.3.8 PIP Placing

PIP Placing lets you decide where the PIP shall appear. You can of course move the PIP with
the Layout button on the remote anytime.
Top PIP is placed in the Top Right corner.
Right
Bottom PIP is placed in the Bottom Right corner.
Right
Bottom
PIP is placed in the Bottom Left corner.
Left
Top PIP is placed in the Top Left corner.
Left

4.3.9 VNC Settings

VNC Settings is necessary when using a VNC presentation. See chapter
Presenter and VNC for more about how to use VNC.
Address The IP-address of the PC with the VNC software installed. To find the IP-
address of the PC, place the mouse pointer on the VNC program icon in the
lower right corner of the Windows taskbar. You can also select Command
Prompt from the Startup-menu\Run and type cmd then enter. This will open
a command window and from here. Type "ipconfig" and press enter.
Display The display number for VNC is 0 and upwards. If you are using WinVNC,
Number double-click on the icon on the taskbar to view WinVNC properties. This
number should correspond with Display Number in this menu.
Password Enter the same password as specified in WinVNC properties. The
password will be shown as asterisk signs (*) the next time you enter the
menu.
74
3.11.4 PC Soft