Web Interface - TANDBERG 1500 MXP User Manual

5.7 Web Interface

It is possible to access and maintain the system remotely via a local area network (LAN)
using a standard Web-browser. Connect your system to a LAN with a Network cable.
How to configure your system for web interface:
1. Open Administrator Settings and choose Network\LAN Settings
2. Specify IP-assignment DHCP or Static. If DHCP is selected, no other settings are
needed. If Static is selected, IP-address, IP-subnet mask and Gateway must be
specified.
3. Start your Web-browser. In the address field type the IP-address of the system. Enter
the password and the Web-page of the system will be shown. The default password
is TANDBERG.
4. Restart the system. Choose Restart from the Control Panel.
Example:
IP-assignment:
IP-address:
IP-subnet mask:
Gateway:
See chapter 4.8.2 LAN Settings
Static
196.9.200.129
255.255.255.0
196.9.200.21
for further information.
5 Peripheral Equipment
113