Leased E1/T1 Settings - TANDBERG F1 D13353.02 User Manual

Call Redirection VNET/Vision: 1
Service: 23 800: 2
PRISM1, PRISMII,
WATS: 3
900: 4
DAL: 5

4.8.1.3 Leased E1/T1 Settings

Call Control
Auto
The call connects automatically when video data is present.
Manual The call has to be connected manually.
Network Interface
Indicates if the network is of type E1 (30 channels) or T1 (24 channels). E1 will be default for
PAL versions, T1 default for NTSC versions.
Max Channels
Indicates the maximum number of channels the codec is allowed to use on the E1/T1
interface. When E1 is selected, maximum is 30 channels. When T1 is selected, maximum is
24 channels.
Start Channel
Indicates the first E1/T1 channel the codec is allowed to use. This setting might be used if the
E1/T1 line is shared with other equipment.
T1 Line Coding
Indicates how the signals on the line should be coded. If parts of the line between the
systems use restricted coding, this should be selected.
Note that all settings must be identical on both sides of the Leased E1/T1 connection.
Line Settings
This is the same menu as for ISDN-PRI. Please refer to chapter
4 Administrator Settings
4.8.1.2 ISDN-PRI Settings.
105