Table of Contents
Advertisement
TANDBERG 8000 MXP
2.4 System Configuration
The system must be configured for each installation. Configuration settings can be made via
the system menu. If an external IMUX or non-standard network is being used it may be
necessary to configure any associated external equipment.
Navigate through the menu system using the arrow keys and OK. Remember to press the
Save button on the bottom of each menu to save your changes. Press Cancel (x) to return to
the previous Menu. See next section for more information about how to use the menus and
the remote control.
General configuration:
1. Open the General Settings menu
Press OK to open the Main Menu (if it is not already open).
Select Control Panel and then select Administrator Settings. Select General to
open the General Settings menu.
2. Language
Press OK in the Language field and select the language you want to use from the
list.
3. System Name
Enter a name in the System Name field using the number keys on the remote
control, as you would do with a mobile or cellular phone.
4. Dual Monitor
If you are using two monitors, set Dual Monitor to On. If you are using one
monitor, set Dual Monitor to Off.
5. Auto Answer, Max Call Length, Global Phone Book Settings and
Permissions
18
Advertisement
Table of Contents
