H.239; Startup Video Source; Presentation Source; Snapshot Source - TANDBERG F1 D13353.02 User Manual

Manual When starting a presentation, a dialog box appears asking if you want to start
Duo Video. In this way you can choose manually if you want to use Duo Video
or not.

4.3.2 H.239

H.239 supports transmission of two video streams. It combines elements of Duo Video and
People+Content. If H.239 is disabled you will still be able to start TANDBERG Duo Video.
Enabled: Enables H.239
Disabled:
Disables H.239

4.3.3 Startup Video Source

The Startup Video Source is the video source on display when the system wakes up from
standby mode. If you use Main Camera as start up source, the system will start with Main
Camera every time the system wakes up from standby, regardless of what the previous user
was using.
You can change Startup Video Source to Main Camera, PC, Document Camera, VCR, AUX,
VNC or Current. Choosing Current will result in the last used video source before the system
went to standby.

4.3.4 Presentation Source

The Presentation Source is connected to the Presentation button on the remote. Pressing the
Presentation button will put the Presentation Source on display. Presentation Source is PC by
default. You can change the Presentation Source to any video source and none. Choosing
none results in opening the Presentation menu when pressing the Presentation key.

4.3.5 Snapshot Source

When you take a Snapshot, you get a snapshot of the Snapshot Source. Current is the
default Snapshot Source. This means that you take a snapshot of the video source that is
currently active.
4 Administrator Settings
81