Table of Contents
Advertisement
TANDBERG 8000 MXP
6.10 Appendix 10
(Not for set top systems)
Pinouts and Connectors
WAVE II Camera:
8-PIN RJ (shielded modular jack):
This connector is used for the power and control signals to the main camera.
Pin-8
+12V (presence when connected in
daisy chain)
Pin-7
GND
Pin-6
GND
Pin-5
RXD (in)
Pin-4
TXD (out)
Pin-3
+12V
Pin-2
GND
Pin-1
+ 12V
Standard Phono:
Used for composite video signal
Power:
2.0 mm DC power jack (+12V, 1A required)
Standard Mini Din:
Used for S-Video signal
6-PIN RJ (modular jack):
This connector is used when cascading cameras: Control (out) signal and external camera
detection. Note: It does not provide power for cascaded camera.
PRI
Pinout
Pin-6
GND
Pin-5
GND
148
Advertisement
Table of Contents
