Network; Isdn/External/Leased E1/T1 - TANDBERG F1 D13353.02 User Manual

TANDBERG 8000 MXP

4.8 Network

The network menu contain:


ISDN/External/Leased E1/T1


LAN Settings

Network Profiles

Data Port
4.8.1 ISDN/External/Leased E1/T1
Network Before using the system it is necessary to specify which network to use and
Type define its settings.
ISDN-
If you want to use your system via ISDN-BRI, you should select Network
BRI Type: ISDN-BRI and enter the ISDN BRI Settings menu to set the BRI
parameters.
ISDN- If you want to use your system via ISDN-PRI, you should select Network
PRI* Type: ISDN-PRI and enter the ISDN PRI Settings menu to set the PRI
parameters.
Leased If you want to use your system via Leased E1/T1, you should select Network
E1/T1*
Type: Leased E1/T1 and enter the Leased E1/T1 Settings (see chapter
4.8.1.3 Leased E1/T1
External If you want to use special networks and connect using RS449, V.35, X.21 or
connect to ISDN via an external IMUX, you should select Network Type:
External and enter the External Network Settings (see chapter
External Network Settings
*Note that both Leased E1/T1 and ISDN-PRI uses the same physical interface on the codec
marked E1/T1.
100
Settings) menu to set the Leased E1/T1 parameters.
menu to set the External Network parameters.
4.8.1.4