Declaration Of Conformity - eXact PipeCut+Bevel 280 Pro Series Operating Instructions Manual

Exact PipeCut+Bevel 280 / 360 / 460 Pro Series
Data of Exact PipeCut saw blades
1. Exact TCT saw blades are for cutting steel,
copper, aluminum and all kind of plastics pipe
materials. Exact TCT saw blades can be
sharpened.
2. Exact CERMET saw blades are for cutting
stainless steel, acid proof materials, steel,
copper, aluminum and all kind of plastic pipe
materials. Exact CERMET saw blades can be
sharpened.
3. Exact CERMET ALU saw blades are for cutting
all kind of aluminum and plastic pipe materials.
Exact CERMET ALU saw blades can be
sharpened.
4. Exact TCT P blades are for cutting all kind of
plastic pipe materials. Exact TCT P saw blades
can be sharpened.
5. Exact DIAMOND X discs are for cutting Cast or
Ductile Iron only. Exact DIAMOND X discs
cannot be sharpened.
280 Pro Series / 360 Pro Series / 460 Pro Series
speed control recommendations:
Stainless steel I
Steel II
Cast-iron II
Plastics II

Declaration of Conformity

We declare under our sole responsibility that the pipe cutting machines
Exact PipeCut+Bevel 280 / 360 / 460 Pro Series
Described under" Technical Data" are in conformity with the following standards or standardization
documents:
IEC 62841-1:2014, IEC 62841-2-5:2014, EN 62841-1:2015, EN 62841-2-5:2014, EN 55014-1,
EN 55014-2, EN 61000-3-2, EN 61000-3-3
These instructions are translation of the original instructions written in Finnish
For more information, please contact Exact Tools at the following address:
The technical file is available at the address underneath:
The person authorized to compile the technical file:
Seppo Makkonen, chairman of the board (seppo.makkonen@exacttools.com)
Helsinki, 01.02.2018
Seppo Makkonen, chairman of the board Exact Tools Oy
Särkiniementie 5 B 64
FI-00210 Helsinki, Finland
2
English