Connecting The Rf Cable Assembly To The Spectrum Analyzer - HP 84125C User Manual

Connecting the RF Cable Assembly to the Spectrum
Analyzer
Refer to Figure 3-2 for the following procedure.
Figure 3-2. Front view of the Spectrum Analyzer
1. Use a #15 torx driver and two 4.0 mm X 12.0 mm torx screws to
attach the strain-relief support bracket to the spectrum analyzer
mounting bracket. Notice that the strain-relief bracket has four
holes in the bottom surface. Use the two holes closest to the strain
relief.
System Setup and Functional Tests 3-7