Speci Cations And Characteristics; De Nition Of Terms - HP 84125C User Manual

Speci cations and Characteristics
De nition of Terms
Frequency Range
HP 84125C
Spectrum Analyzer Displayed Average Noise Level
(Measured at test-set input with 1 MHz RBW)
1 to 18 GHz
18 to 26.5 GHz
26.5 to 40 GHz
1
For use with the through cable or the correct high-pass lter for the selected frequency range
Limit to Noise Ratio / Sensitivity (Characteristic)
> 
6 dB (at 64 dB V/m)
This chapter contains speci cations, characteristics, and typical
performance for the HP 84125C system.
Speci cations
describe warranted performance which is traceable
to the National Bureau of Standards (NIST).
Characteristics
describe non-warranted performance derived
during the design phase of the system and is not veri ed on a
continuing basis.
Typical Performance
which most units will exhibit.
1
is non-warranted, but indicates performance
1 to 40 GHz
Speci cation

6 dB V

6 dB V

9 dB V
Speci cations and Characteristics 2-1
2
Typical

3 dB V

3 dB V

0 dB V