Table of Contents
Advertisement
Replacing the Front Panel Power Reference Cable Assembly
1. Remove the front panel from the power meter. (Refer to "Removing
the A3 Front Panel Assembly", on page 5-14 for details on
removing the front panel.)
2. Replace the power reference output cable assembly using the
replacement kit and the torques indicated on the following
diagrams.
9 lb/in
HP EPM-441A/442A Service Guide
Assembly and Disassembly Guidelines
6 lb/in
Replaceable Parts
Fold up tab
after assembly
25 lb/in
5-17
Advertisement
Table of Contents
