Table of Contents
Advertisement
Configuration
(Standalone)
Button Menu
Dimmer
Affects brightness of the light. Press
and hold either <MAX> to brighten
or <MIN> to darken, from 0–100%.
Changes color of LED light output. Choose
color on the menu to change to desired color.
Color Wheel
Calibration
Mode
LED Followspot 75ST User Manual Rev. 7
Set this product in one of the standalone modes to control it without a DMX controller.
1.
Connect this product to a suitable power outlet.
2.
Turn this product on.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. This is because products in standalone mode may
transmit signals that could interfere with the DMX signals from the controller.
To control the product in standalone mode, press <FUNCTION SELECT> until the
Control Panel displays NAn. Then, simply use the button menu on the back of the
product. Each button serves a different function, as detailed below.
Turns light on and off. Press <ON> to
turn on and <BLACK OUT> to turn off.
Color Menu
To calibrate the color wheel of the LED Followspot 75ST, follow the instructions below.
1.
Connect the product to a suitable power outlet.
2.
Turn the product on.
3.
Press and hold <FUNCTION SELECT> for 6 seconds, or until the current
calibration value appears on the display.
4.
Use <UP> or <DOWN> to increase or decrease the color wheel calibration value
until the color wheel is aligned as desired.
5.
Press and hold <FUNCTION SELECT> for 6 seconds to exit the mode.
Shutter
When NAn is displayed, it is in
Manual Mode. When 001 is
displayed, it is in DMX Mode.
Function Select
Toggles between Manual
and DMX modes.
Control Panel
Up/Down
In DMX mode, select
starting address.
Page 11 of 15
Advertisement
Table of Contents
