Table of Contents
Advertisement
Mounting
Orientation
Rigging
Mounting Diagram
Page 8 of 15
Before mounting this product, read and follow the safety recommendations indicated in
the
Safety Notes
section.
The LED Followspot 75ST may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
•
Before deciding on a location for this product, always make sure that it will be easy
to access the unit for maintenance and programming purposes.
•
Make sure that the structure onto which you are mounting this product can support
its weight. Please see the
information.
•
If mounting this product overhead, always use a safety cable. Mount the product
securely to a rigging point, whether an elevated platform or a truss.
When rigging this product onto a truss, you should use a mounting clamp of
•
appropriate weight capacity. The bracket has 13 mm holes, which are appropriate
for this purpose.
•
The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs using your
bare hands. Using tools could damage the knobs.
Bracket Adjustment
Knob
Mounting Clamp
(such as CLP-15 or CLP-15N clamp
from CHAUVET®)
The alternative truss mounting is recommended for static installation only. While
using the truss mounting, be sure to continuously check and secure the rigging
points, especially if repositioning the LED Followspot 75ST.
Technical Specifications
Alternative Truss Mounting
LED Followspot 75ST User Manual Rev. 7
section of this manual for weight
Surface
Mounting
Mounting Bracket
Safety Cable
(such as CH-05 from
CHAUVET®)
Advertisement
Table of Contents
