Communication Connections - Weidmuller IE-SW-VL16 Series Hardware Installation Manual

Communication Connections

The models of IE-SW-VL16 series have 14 or 16 10/100BaseT(X)
Ethernet ports, and 2 or 0 (zero) 100 BaseFX multimode (SC/ST-type
connector) fiber ports.
10/100BaseT(X) Ethernet Port Connection
The 10/100BaseT(X) ports located on Ethernet Switch's front panel are
used to connect to Ethernet-enabled devices. Below we show pinouts for
both MDI (NIC-type) ports and MDI-X (HUB/Switch-type) ports, and also
show cable wiring diagrams for straight-through and cross-over Ethernet
cables.
10/100Base T(x) RJ45 Pinouts
MDI Port Pinouts
Pin Signal
1 Tx+
2 Tx-
3 Rx+
6 Rx-
RJ45 (8-pin) to RJ45 (8-pin) Straight-Through Cable Wiring
RJ45 (8-pin) to RJ45 (8-pin) Cross-Over Cable Wiring
MDI-X Port Pinouts
Pin Signal
1 Rx+
2 Rx-
3 Tx+
6 Tx-
- 12 -
8-pin RJ45