Graco ExactaBlend 24R200 Operation Manual page 10

Installation
7. Mount the Junction Box.
a. Mount the junction box to the air motor located on the 55 gallon (208 liter) ram.
b. Route the conduit to the junction box from the platen.
- (2) #8-32 Screws
- (2) Lock Washers
8. Mount the Heat Electrical Panel on the 5 Gallon (19 liter) Ram.
- (8) M6x16 Bolts
- (8) Washers
- (8) Lock Washers
- (8) Nuts
- (8) M6x25 Bolts
- (8) Washers
- (8) Lock Washers
- (8) Nuts
10
- (1) 3/8-16 Bolt (Urethane)
- (1) M8 Bolt (Polysulfide)
- (1) Lock Washer
332511B