Installation instruction
Press
when all sensors for System B are found...
System B is installed...
System is being checked...
Press
to select system to configure.
Press
to configure selected system (naming
sensors, changing factory settings and setting priorities.)
Please refer to "Changing parameters and performance of systems" in "User Manual"
for description of the configurable parameters.
Press
to end configuration.
22 | © Danfoss | 2019.07
ECtemp 850 IV
SYSTEM B!
INSTALLED
CHECKING SYSTEM
<-------->
CONFIG SYSTEM:
SYSTEM A
CONFIG SYSTEM:
SYSTEM B
PRESS TO END
CONFIGURATION.
08097083 / VIMHE202