Danfoss ECtemp 850 IV Installation Instruction page 20

Installation instruction
Press when all sensors for System B are
found...System B is installed...
System is being checked...
Press to select system to configure.
Press to configure selected system (naming
sensors, changing factory settings and setting priorities.)
Please refer to "Changing parameters and performance of systems" in "User Manual"
for description of the configurable parameters.
Press to end configuration.
20 | © Danfoss | 2019.07
ECtemp 850 IV
SYSTEM B!
INSTALLED
CHECKING SYSTEM
<-------->
CONFIG SYSTEM:
SYSTEM A
CONFIG SYSTEM:
SYSTEM B
PRESS  TO END
CONFIGURATION.
08097083 / VIMHE202