Nexcom NISE 4200 User Manual page 65

Chapter 4: BIOS Setup
Graphics Configuration
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Chipset
Graphics Configuration
DVMT Total Gfx Mem [256M]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
DVMT Total Gfx Mem
Selects the DVMT5.0 Total Graphic Memory size used by the Internal
Graphics Device.
Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
PCH-IO Configuration
This section is used to configure PCH-IO configuration.
Select DVMT5.0 Total Graphic
Memory size used by the
Internal Graphics Device.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
PCH LAN Controller
Enables or disables onboard NIC.
State After G3
Configures the power state when power is re-applied after a power failure
(G3 state).
USB2.0 Power State in Standby
Configures the USB 2.0 power state in standby mode.
USB3.0 Power State in Standby
Configures the USB 3.0 power state in standby mode.
51
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Chipset
PCH-IO Configuration
► SATA And RST Configuration
Security Configuration
►
► HD Audio Configuration
PCH LAN Controller [Enabled]
State After G3 [S0 State]
USB2.0 Power State in Standby [Power Off]
USB3.0 Power State in Standby [Power On]
LAN1 [Enabled]
MINI_CARD1 [Enabled]
MINI_CARD2 [Enabled]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
SATA Device Options Settings
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NISE 4200 User Manual