Grundfos UPE 2000 Series Installation And Operating Instructions Manual page 17

8.2.2 Setting of pump head
The desired pump head is set by pressing
The light fields on the control panel will indicate the
head set.
The scaling is set to be approx. 1.2 metres per light
field.
The table below shows examples of pump head
settings indicated by the light fields.
UPE 100-120 FZ
UPE(D) 80-120 FZ
or .
Constant-pressure control
H m
12
0
Q
Light fields 5 and 6 are
activated, indicating a desired
head of approx. 6.5 metres.
Proportional-pressure control
H m
12
0
Q
Light fields 5 and 6 are
activated, indicating a desired
head of approx. 6.5 metres.
17