Talkswitch 48 User Manual page 113

DTMF descriptions dialed from a Local Extension.
DTMF Function performed
1x1-1x8 Intercoms a Local Extension
119 Reserved
2x1-2x8 Dials a Remote Extension (associated
with an external phone number).
300-309 Dials an Extension Ring Group - 10 in
total for the entire system. Mapped to
local extension(s), with specific fall
through options.
<flash> if Puts caller on hold.
connected to a
caller
<flash> at It retrieves the most recent caller put on
internal dialtone hold.
<flash> at Switches to internal dialtone. Used
external dialtone mainly when an extension has Direct
Line Access enabled.
Dials into a voice mailbox.
1x1-1x8
2x1-2x8
4x0-4x9
1x1-1x8
Internal voicemail retrieval/access.
2x1-2x8
4x0-4x9
<flash>4
Completes a transfer and returns to
internal dialtone
0
External P .A. Access
114 TalkSwitch User Manual
Notes
Direct dial from dialtone.
x represents the Unit ID
Direct dial from internal dialtone.
Direct dial from internal dialtone.
x represents the Unit ID
Direct dial from internal dialtone.
After putting a caller on hold, you receive
internal dialtone.
To retrieve the caller on hold for the most
time, dial 7 at internal dialtone
Dialed when connected to an outside line.
To transfer a caller to a mailbox, press
'flash' to place a call on hold, then
1x8, 2x1-2x8, or 4x0-4x9 and hang
up.
x represents the Unit ID
Direct dial 1x1-1x8,
or 4x0-4x9 from internal dialtone to
retrieve voicemail.
x represents the Unit ID
Action performed after putting a caller on
Hold then dialing an indented destination.
Direct dial 0 at dial tone to make an
announcement through the attached
external P .A. system.
Networked
Networked
1x1-
Networked
2x1-2x8,
Networked