Prompted Call Back - Talkswitch 48 User Manual

If you need to configure and/or record an Announced Message from a remote location
and do not have the Auto Attendant set to answer this Call Back line, you can call your
Call Back number and let it ring 15 times. A generic Auto Attendant will answer and
you can configure Call Back by pressing 6.
Allow Call Bridge:
To allow Call Bridge after a Call Back has been accepted, check the Allow Call
Bridge box. You may also restrict the Hunt Group access using Call Bridge from
this Call Back by choosing the Hunt Group Access button. By default, Call
Bridge is enabled when Call Back is activated. You will not be prompted for
another password when you choose a Hunt Group at the Auto Attendant.
When entering a Call Back phone number using a telephone, you can enter special
characters using a special prefix. The default prefix is the
dialing string you will need to dial
, dial . When you have completed the entire dial string you need to dial

2.3.4.2 Prompted Call Back

If you are travelling to a location where you do not yet know the phone number,
you can use Prompted Call Back to save on your long distance charges. For details
on using Call Back, see section 3.7.2.
2.0
key. To enter a
, for a 2 second pause dial
Configuring TalkSwitch
in a
0, and for a
.
61