Appendix C - Quick Commands And Dtmf Functions - Talkswitch 48 User Manual

Appendix C - Quick Commands and DTMF Functions

These DTMF Quick Commands can be dialed from a Local Extension or an outside
telephone at the Auto Attendant. To enter Command mode, dial
Extension or at the Auto Attendant. If you are requested to enter a password, enter
the Administrator password. Next, enter any command followed by the
Command
00
0x
30
3x
4x
04x
5x
61 - 64
65
061 - 064
065
71 - 74
75
90
91
2xx 8<phone number>
2xx 980 0
2xx 980 1
2xx 9 <Hunt Group>
1xx 61
1xx 60
Action
TalkSwitch tells you the Unit ID of the unit you are
connected to.
Assign Unit ID 1 - 4 to TalkSwitch (x = 1 to 4)
TalkSwitch tells you which mode it is currently using
Switch Modes (x = 1or 2)
Record Auto Attendant (x = 1 to 9)
Erase Auto Attendant messages (x = 1 to 9)
Playback Auto Attendant messages (x = 1 to 9)
Record Auto Call Back Announced Messages 1 - 4
Record Prompted Call Back Announced Message
Erase Call Back Announced Messages 1 -4
Erase Prompted Call Back Announced Message
Playback Auto Call Back Announced Messages 1 - 4
Playback Prompted Call Back Announced Message
Set to Serial connection mode (default)
Set to USB connection mode
Enter Remote ext. (2xx) phone number
Enter Remote ext. (2xx) Turn off "Same Line Connect"
Enter Remote ext. (2xx) Turn on "Same Line Connect"
Enter Remote ext. (2xx) "Connect using:" Hunt Group
(Hunt Group = 9, 81-88)
Enable 'Do not Disturb' at the Local Extension
Disable 'Do not Disturb' at the Local Extension
at a Local
sign.
Appendices 113
Networked
Networked