Sauna Heater Remote Control - Helo Fusion 60 Instructions For Installation And Use Manual

3.8. Sauna heater remote control

Before the sauna heater remote use is possible, the remote control feature must be activated from the
control centre circuit board. The activation is done by setting the switch 4 to "ON" position (same
switch group than in the maximum setting for bathing time). After that it is possible to use the "R"
button to set remote control.
Connect a potential free connector to the sauna heater EXT. CNTRL connection (switch, relay or similar
). When the connector is closed, the control centre starts the preselected bathing program. Opening the
connector will automatically abort the remote control function and turn the sauna heater and control
centre off.
ON = Remote use possible
OFF = Remote use blocked
1 2
EXT. CNTRL
23