Table of Contents
Advertisement
Operating and installation instructions Fonda duo
1. Quick instructions for sauna heater
1.1 Check before taking a sauna bath
1.
that the condition of the sauna room is suitable for taking a sauna.
2.
that doors and windows are closed
3.
that the stones in the heater are recommended by the manufacturer, that the stones cover the heating
elements and that the stones are piled sparsely.
NOTE! Ceramic stones must not be used.
The sauna bath is comfortable at a temperature of about 70 °C.
Rearrange the unit's stones at least once a year and replace crumbled stones. This enhances air circulation between
the stones, extending the life of the heating elements.
Further information about sauna baths is available at: www.helo.fi
1.2 Using the heater's controls
The main switch is located in the base of the heater. The type plate shows the switch positions ( 0 I ).
See the instructions for the control unit in the "Using the Control Unit" section.
2. Information for users
Persons with reduced physical or mental capacity, disabilities, or little experience or knowledge of the equipment's
use (e.g. children), should only operate the equipment under supervision or according to instructions from the person
responsible for their safety.
Ensure that children do not play close to the sauna heater.
2.1 Sauna room
The walls and ceiling of the sauna room should be thermally well insulated. All surfaces that store heat, such as tiled
and plastered surfaces, must be insulated. Wood paneling is recommended for the sauna room's walls and ceiling. If
the sauna room's walls and ceiling have been clad with material that is highly heat-insulating (e.g. different types of
decorative stones, standard glass etc.), it must be remembered that this prolongs the sauna's heating-up time, even
though the sauna room is otherwise well insulated (see page 10, section 3 - Preparing for sauna heater installation).
3
Hide quick links:
Advertisement
Table of Contents
