Related Manuals for Wacker Neuson P 35A
Summary of Contents for Wacker Neuson P 35A
- Page 1 Operator’s Manual Wet Screed P35A Type P35A Document 5000192669 Date 0818 Revision Language 5 0 0 0 1 9 2 6 6 9...
- Page 2 Copyright notice © Copyright 2018 by Wacker Neuson Production Americas LLC All rights, including copying and distribution rights, are reserved. This publication may be photocopied by the original purchaser of the machine. Any other type of reproduction is prohibited without express written permission from Wacker Neuson Production Americas LLC.
-
Page 3: California Proposition 65 Warning
CALIFORNIA Proposition 65 Warning CALIFORNIA Proposition 65 Warning WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. WARNING Diesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth defects, and other reproductive harm. - Page 4 CALIFORNIA Proposition 65 Warning Notes wc_tx004643en.fm...
-
Page 5: Foreword
Americas LLC will be referred to as Wacker Neuson. ■ Keep a copy of the Operator’s Manual with the machine at all times. ■ For spare parts information, please see your Wacker Neuson Dealer, or visit the Wacker Neuson website at http://www.wackerneuson.com/. - Page 6 ■ The information contained in this manual is based on machines manufactured up until the time of publication. Wacker Neuson reserves the right to change any portion of this information without notice. ■ The illustrations, parts, and procedures in this manual refer to Wacker Neuson factory-installed components.
-
Page 7: Ec Declaration Of Conformity
We hereby declare that this product meets and complies with the relevant regulations and requirements of the following directives and standards: 2006/42/EC, 2014/30/EU, EN 12649 Authorized Person for Technical Documents Robert Raethsel, Wacker Neuson Produktion GmbH & Co. KG, Wackerstrasse 6, 85084 Reichertshofen, Germany Menomonee Falls, WI, USA, 09.05.16 Keith Herr... -
Page 9: Table Of Contents
P35A Table of Contents CALIFORNIA Proposition 65 Warning Foreword EC Declaration of Conformity Safety Information Signal Words Used in this Manual ............. 11 Machine Description and Intended Use ..........12 Operating Safety ................13 Service Safety ..................15 Operator Safety while Using Internal Combustion Engines ....17 Labels Label Locations .................. - Page 10 Table of Contents P35A Air Cleaner ..................32 Spark Plug (Wacker Neuson/Honda) ..........33 Cleaning the Machine ................34 Long-Term Storage ................34 Troubleshooting ...................34 Technical Data Engine ....................35 Blades ....................36 Dimensions ..................36 Sound and Vibration Specifications .............37 Emission Control Systems Information and Warranty Emission Control Systems Warranty Statement .........38...
-
Page 11: Safety Information
P 35A Safety Information Safety Information Signal Words Used in this Manual This manual contains DANGER, WARNING, CAUTION, NOTICE, and NOTE signal words which must be followed to reduce the possibility of personal injury, damage to the equipment, or improper service. -
Page 12: Machine Description And Intended Use
P 35A Machine Description and Intended Use This machine is a vibratory concrete screed. The Wacker Neuson Wet Screed consists of a gasoline engine, a fuel tank, a metal blade, an eccentric weight positioned at the center of the metal blade, and a control handle. The gasoline engine spins the eccentric weight through a drive shaft, producing vibrations that travel the length of the metal blade. -
Page 13: Operating Safety
To ensure safe operation of the machine: ■ Do not operate the machine if any safety devices or guards are missing or inoperative. ■ Do not modify or defeat the safety devices. ■ Only use accessories or attachments that are approved by Wacker Neuson. wc_si000748gb_FM10.fm... - Page 14 Safety Information P 35A Safe When operating this machine: operating ■ Remain aware of the machine’s moving parts. Keep hands, feet, and loose practices clothing away from the machine’s moving parts. ■ Do not operate a machine in need of repair.
-
Page 15: Service Safety
■ Turn off the machine before performing maintenance or making repairs. Machine When servicing or maintaining the machine: modifications ■ Use only accessories/attachments that are approved by Wacker Neuson. ■ Do not defeat safety devices. ■ Do not modify the machine without the express written approval of Wacker Neuson. - Page 16 Safety Information P 35A Personal Wear the following Personal Protective Equipment (PPE) while servicing or protective maintaining this machine: equipment ■ Close-fitting work clothes that do not hinder movement (PPE) ■ Safety glasses with side shields ■ Hearing protection ■ Safety-toed footwear In addition, before servicing or maintaining the machine: ■...
-
Page 17: Operator Safety While Using Internal Combustion Engines
P 35A Safety Information Operator Safety while Using Internal Combustion Engines WARNING Internal combustion engines present special hazards during operation and fueling. Failure to follow the warnings and safety standards could result in severe injury or death. ► Read and follow the warning instructions in the engine owner’s manual and the safety guidelines below. -
Page 18: Labels
Labels P35A Labels Label Locations wc_gr008018 wc_si000749gb_FM10.fm... -
Page 19: Label Meanings
P35A Labels Label Meanings WARNING To reduce the risk of hearing loss and eye injury, always wear hearing protection and eye protection when operating this machine. 178745 178745 WARNING Hot surface DANGER Asphyxiation hazard Engines emit carbon monoxide. Do not run the machine indoors or in an ... - Page 20 Labels P35A WARNING Rotating machinery! Do not reach inside machine when the engine is running. California Proposition 65 Warning WARNING Cancer and Reproductive Harm - Cancer and Reproductive Harm www.P65Warnings.ca.gov. www.P65Warnings.ca.gov ADVERTENCIA Cáncer y daño reproductivo www.P65Warnings.ca.gov AVERTISSEMENT Cancer ou malformations congénitales www.P65Warnings.ca.gov 5100045462...
-
Page 21: Lifting And Transporting
P35A Lifting and Transporting Lifting and Transporting To lift and transport the machine: 1. Loosen the screws (a) and fold down the upper guide handle (b). Tighten the screws to hold the upper guide handle in position. wc_gr010850 2. Use the lifting handle (c) at the base to lift and transport the machine. wc_tx003252gb_FM10.fm... -
Page 22: Operation
Operation P 35A Operation Control / Component Locations Description Description Adjustable handle Kickstand Adjustable handle grips Lifting handle Throttle control Blade Fuel tank — — wc_gr008019 wc_tx003253gb_FM10.fm... -
Page 23: Preparing The Machine For First Use
1. Make sure all loose packaging materials have been removed from the machine. 2. Check the machine and its components for damage. If there is visible damage, do not operate the machine! Contact your Wacker Neuson dealer immediately for assistance. -
Page 24: Recommended Fuel
Before using an oxygenated fuel, confirm the fuel’s contents. Some states and provinces require this information to be posted on the fuel pump. The following is the Wacker Neuson approved percentage of oxygenates: ETHANOL - (ethyl or grain alcohol) 10% by volume. You may use gasoline containing up to 10% ethanol by volume (commonly referred to as E10). -
Page 25: Starting
P 35A Operation Starting 1. Move the choke lever to the closed position (a1). Note: If engine is hot, set choke to open position (a2 ). 2. Turn engine switch to “ON”. 3. Press the priming bulb (b) repeatedly until fuel can be seen in the clear plastic fuel-return tube (c). -
Page 26: Operation
Operation P 35A Operation Procedure Perform the procedure below to perform a typical screeding of concrete. 1. Establish wet pads for wet screed guidance. Place wet pads (a) in strips no less than 0.6m (2.0 ft) wide. wc_gr07996 Note: Hand tools such as magnesium floats are used in conjunction with a laser receiver, transit level, or grade stakes to establish the proper elevation of the pads. - Page 27 P 35A Operation Continued from the previous page. Note: Screeding MUST be complete before any excess moisture or bleed water is present on the surface, and before the strips have taken an initial set. 5. Start the engine and move the throttle forward one-half to three-quarters. This increases the engine speed to approximately 6000–7000 rpm which is...
-
Page 28: Exciter Adjustment
Operation P 35A Exciter Adjustment Overview Proper operation of the screed produces a creamy liquid around the blade during strike-off. If a creamy liquid does not form at the standard throttle range of one-half to three-quarters speed (6000–7000 rpm), or with slight speed increases, then adjust the exciter. -
Page 29: Adjusting The Handle Height
P 35A Operation 4.10 Adjusting the Handle Height For maximum comfort and user control of the wet screed during operation, the handlebar (a) can be rotated up or down to suit the operator’s preference. Loosen the screws (b) and raise or lower the handlebar as desired. Tighten the screws when the handles are in the desired position. -
Page 30: Maintenance
Wacker Neuson. The use of service parts that are not equivalent in performance and durability to authorized parts may impair the effectiveness of the emission control system and may have a bearing on the outcome of a warranty claim. -
Page 31: Engine Oil
P35A Maintenance Engine Oil 1. Drain oil while the engine is still warm. 2. Turn the engine 90° so the fuel tank is facing downward. Check that the fuel tank cap (a) is tightened. 3. Remove the oil fill plug (b) and drain the oil into a container by tipping the engine toward the oil filler neck (c). -
Page 32: Air Cleaner
Maintenance P35A Air Cleaner The engine is equipped with a single element air cleaner. Service air cleaner frequently to prevent carburetor malfunction. NOTICE: Do not run engine without air cleaner. Severe engine damage will occur. WARNING Fire and explosion hazard. ►... -
Page 33: Spark Plug (Wacker Neuson/Honda)
P35A Maintenance Spark Plug (Wacker Neuson/Honda) Clean or replace the spark plug as needed to ensure proper operation. Refer to your engine owner’s manual. WARNING Hot surface hazard. The muffler becomes very hot during operation and remains hot for a while after stopping the engine. -
Page 34: Cleaning The Machine
Maintenance P35A Cleaning the Machine 1. Remove any excess concrete with a high pressure washer. Be sure to remove any concrete buildup on the underside of the blades. Note: When pressure washing the machine, avoid using harsh chemicals and only use moderate water pressure (500–1000 psi). -
Page 35: Technical Data
P 35A Technical Data Technical Data Engine Engine Power Rating Net power rating per SAE J1349. Actual power output may vary due to conditions of specific use. P 35A P 35A 0620956, 0620957 0620958 Engine Engine type 4-stroke, overhead camshaft,... -
Page 36: Blades
Technical Data P 35A Blades Length Width Weight Blade Models m (ft) m (in.) kg (lb) SB 4F 1.2 (4) 0.12 (4.88) 3.4 (7.6) SB 15M 1.5 (4-11") 0.12 (4.88) 4.3 (9.5) SB 6F 1.8 (6) 0.12 (4.88) 5.2 (11.4) SB 20M 2.0 (6-7") -
Page 37: Sound And Vibration Specifications
P 35A Technical Data Sound and Vibration Specifications Sound The required sound specification, Paragraph 1.7.4.2.u of 2006/42/EC Machinery specifications Directive, is: the sound pressure level at operator’s location (L ): 85 dB(A) the guaranteed sound power level (L ): 97 dB(A) ... -
Page 38: Emission Control Systems Information And Warranty
Emission Control Systems Information and Warranty Emission Control Systems Information and Warranty The Emission Control Warranty and associated information is valid only for the U.S.A., its territories, and Canada. Emission Control Systems Warranty Statement See the supplied engine owner’s manual for the applicable exhaust and evaporative emission warranty statement. - Page 39 Wacker Neuson Production Americas LLC, N92W15000 Anthony Ave., Menomonee Falls, WI. 53051 Tel.: (262) 255-0500 Fax: (262) 255-0550 Tel.: (800) 770-0957 Wacker Neuson Limited - Room 1701–03 & 1717–20, 17/F. Tower 1, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hongkong. Tel: (852) 3605 5360, Fax: (852) 2758 0032...