9.6
Gain
The gain has Analog Gain, Digital Gain and White Balance Gain.
(*) When increasing the gain level may increase the noise level.
Please check the image on the actual environment when adjusting brightness of image.
9.6.1 Analog Gain
This parameter sets the analog gain.
Selects "Analog ALL" at "Gain Selector", sets gain at "Gain[Gain Selector]".
GenICam Parameters
Gain[Analog All]
IFloat Type
Analog Gain Formula
Gain (x times) = 2 ^ (Gain[Analog All][6]) (1 + Gain[Analog All][5:0]) / 64)
9.6.2 Digital Gain
This parameter sets the digital gain.
Selects "Digital ALL" at "Gain Selector", sets gain at "Gain[Gain Selector]".
GenICam Parameters
Gain[Digital All]
IFloat Type
Digital Gain Formula
Gain (x times) = Gain[Digital All] / 64
9.6.3 White Balance Gain (Only available for the color model)
This parameter sets the Bayer patter color gain.
Sets gain at "Balance Ratio" for selected color at "Balance Ratio Selector".
GenICam Parameters
BalanceRatio[BalanceRatioSelector]
White Balance Gain Formula
Gain (x times) = BalanceRatio[BalanceRatioSelector] / 128
STC-MBE132U3V / MCE132U3V / STC-MCE132U3V-C
Product Specifications and User's Guide
Analog Gain
Range: 0 to 127, Default: 0
Digital Gain
Range: 0 to 255, Default: 0
IFloat Type
White Balance Gain
Range: 0 to 511,
Default: Red: 248, Green: 128, Blue: 248
No.13S062-07
37/53