Table of Contents
Advertisement
8.2.2
User Output
High or low level signal that was configured on the software is output.
Setting Procedure
Selects Line N (N: any number from 0, 1 or 2)
1) Sets the User Output N (N is Line number) as Line Source
2) Selects User Output N (N is same as selected Line number on User Output) on User Output Selector
3) Sets the value (True: High level, False: Low level) on User Output Value
8.2.3
Line Status
Monitor the status on output port.
Monitor the output voltage level High (Line Status: true) or Low (Line Status: false) through the software.
8.2.4
Output signal duration setting and Pulse width setting
Some selectable functions can be modified in order to add to the duration or pulse width on Line Source.
The configurable parameters are shown in the chart below.
Please refer to Line Source for the applicable functions of Parameters.
GenICamParameters
TriggerOutDelay
Integer Type
TriggerOutOnTime
Integer Type
StrobeOutDelay
Integer Type
StrobeOutOnTime
Integer Type
STC-MBE132U3V / MCE132U3V / STC-MCE132U3V-C
Product Specifications and User's Guide
Trigger Out Delay Time
Range: 0 to 262,143 μseconds, Default: 0 μsecond
Trigger Out On Time
Range: 4 to 262,143 μseconds, Default: 32 μseconds
Strobe Out Delay Time
Range: 0 to 262,143 μseconds, Default: 30 μseconds
Strobe Out On Time
Range: 4 to 262,143 μseconds, Default: 32 μseconds
No.13S062-07
30/53
Advertisement
Table of Contents
