Msb Positioning Using The User Plane Protocol - Huawei ME936 Application Manual

HUAWEI ME936 LTE M.2 Module
Application Guide
Command
^POSEND: -1,9

14.3 MSB Positioning Using the User Plane Protocol

Command
AT^WPDOM=5
OK
AT^WPDST=1
OK
AT^WPDFR=0,1
OK
AT^WPURL=SUPL.GOOGLE.COM:7276 Sets the A-GPS server address and
OK
AT^WPDGP
OK
^POSEND: -1,65535
Issue 02 (2017-12-11)
 The standalone method can be used when the module has no SIM card inserted.
If there is an ongoing positioning session, the session must be terminated before setting

the positioning parameters so that the parameters can take effect for the positioning to be
started. This rule applies to all positioning methods.
 If the current positioning session is started by executing AT^WPDGP, execute AT^WPEND
command in the same interface can terminate it.
 If the current positioning session is started by opening GPS interface, close GPS interface
can terminate it.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GPS Application Scenarios
Description
The first value indicates positioning
end reason, and the second indicates
the left positioning times.
Description
Sets the positioning method to MSB.
Sets the session type to tracking and
positioning.
Sets unlimited positioning times and
the interval between each positioning
for the tracking and positioning.
port number. This address is just
Google A-GPS server. Some of the A-
GPS server requires certificate
authentication.
Starts positioning.
The first value indicates positioning
end reason, and the second indicates
the left positioning times.
73