A-Gps Test; Gps Positioning In Windows 8; Using The Sensor Diagnostic Tool - Huawei MU736 HSPA+ M.2 Application Manual

Hide thumbs Also See for MU736 HSPA+ M.2:

Table of Contents

HUAWEI MU736 HSPA+ M.2 Module

GPS Application Guide

In Windows 8

On a computer running Windows 8, open a GPS-enabled map application to start

GPS location.

2.3 A-GPS Test

Step 1 Load the Secure User Plane Location (SUPL) server and certificate information onto

the nonvolatile storage of the MU736 module.

The MU736 module has integrated the server and certificate information, and no

additional configuration is required. If an original equipment manufacturer (OEM)

needs to load the certificate other than the integrated one, the OEM can contact

Huawei to integrate the certificate into the PC Vendor tool. Once the certificate is

integrated into the PC Vendor, one-click is required to load the certificate and relevant

server information into the MU736 module.

Step 2 Insert a SIM card that has subscribed to network services into the MU736 module.

Then set up a dial-up connection.

The MU736 starts the A-GPS positioning.

To use the Sensor Diagnostic Tool provided in the Windows driver program installation

kit:

Step 1 Connect the MU736 module to one of the USB ports on a PC.

Step 2 Right-click My Computer, and choose Manage from the shortcut menu. In the

displayed Computer Management window, click Device Manager in the left pane,

and check for HUAWEI GNSS Sensor under Sensors in the right pane.

Issue 01(2013-03-22)

Huawei Proprietary and Confidential

GPS Test Procedure

Table of Contents