Writing Phonebook Entries; Reference Process - Huawei ME936 Application Manual

HUAWEI ME936 LTE M.2 Module
Application Guide
Scenario
AT+CPBR=<index1>,
<index2>
AT+CPBR=<index1>
AT+CPBR=<index1>,
<index2>

7.4 Writing Phonebook Entries

7.4.1 Reference Process

Command
AT+CPBR=?
+CPBR: (1-250),80,14
OK
AT+CPBW="5","13903702
805",,"test"
OK
AT+CPBW=1
OK
There are two methods to edit phonebook entries using the AT+CPBW command:


Issue 02 (2017-12-11)
Possible Error
Information
+CME ERROR: invalid
index
+CME ERROR: not
found
+CME ERROR: not
found
Write an entry to a specified location. This method edits the location where a
phonebook entry exists or writes a new entry to a vacant location.
Write a new phonebook entry to the next location of a location that already has a
phonebook entry. This method does not require a specified storage location. The
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Phonebook Application Scenarios
Solution
The index is invalid. Check
that index 1 and index 2 are
within the supported range and
that index 1 is not greater than
index 2.
No entries are found in the
storage locations in index 1.
Check that there have been
entries successfully written into
these locations.
No entries are found in the
storage locations between
index 1 and index 2. Check
that there have been entries
successfully written into these
locations.
Description
Queries the ranges of parameters related to the
phonebook entries.
Writes a phonebook record.
Deletes the entry in index 1 in the phonebook.
47