Msa Positioning Using The User Plane Protocol; Gnss Positioning - Huawei ME936 Application Manual

HUAWEI ME936 LTE M.2 Module
Application Guide

14.4 MSA Positioning Using the User Plane Protocol

Command
AT^WPDOM=1
OK
AT^WPQOS=255,50
OK
AT^WPURL=SUPL.GOOGLE.COM:7276 Sets the A-GPS server address and
OK
AT^WPDGP
OK
^POSEND: -1,0

14.5 GNSS Positioning

The GNSS positioning uses both the GPS and GLONASS satellites for positioning.
Issue 02 (2017-12-11)
The MSB method requires the module to register with a network, and will incur data traffic
during positioning. When the MSB positioning fails, the module will automatically switch to the
standalone positioning.
 The MSA method requires the module to register with a network, and will incur data traffic
during positioning. When the MSA positioning fails, the module will automatically switch to
the standalone positioning.
For MSA, only the single positioning is supported.

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GPS Application Scenarios
Description
Sets the positioning method to MSA
Sets the positioning service quality.
The first parameter indicates the
response time, and the second
indicates the horizontal accuracy
threshold.
port number. This address is just
Google A-GPS server. Some of the A-
GPS server requires certificate
authentication.
Starts positioning.
The first value indicates positioning
end reason, and the second indicates
the left positioning times.
74