Msb Positioning Using The User Plane Protocol - Huawei ME909u-523 Application Manual

HUAWEI ME909u-523 LTE LGA Module
Application Guide

11.3 MSB Positioning Using the User Plane Protocol

Command
AT^WPDOM=5
OK
AT^WPDST=1
OK
AT^WPDFR=65535,1
OK
AT^WPQOS=255,500
OK
AT^WPURL=SUPL.GOOGLE.COM:7276 Set the A-GPS server address and
OK
AT+CGDCONT=15,"IP","CMNET"
OK
AT^WPDGP
OK
^POSEND: -1,9
Issue 04 (2014-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GPS Application Scenarios
Description
Set the positioning method to MSB.
Set the session type to tracking and
positioning.
Set the number of positioning times
and the interval between each
positioning for the tracking and
positioning.
Set the positioning service quality.
The first parameter indicates the
response time, and the second
indicates the horizontal accuracy
threshold..
port number. This address is just
Google AGPS server. Some of the
AGPS server requires certificate
authentication.
Set the PDP context required by A-
GPS dial-up. By default, A-GPS dial-
up uses the fifteenth PDP context.
"CMNET" is the APN of network that
module have registered.
Start positioning.
The first value indicates positioning
end reason, and the second indicates
the left positioning times.
71