Table of Contents
Advertisement
Available languages
Available languages
3 GHz Spectrum Analyzer HM5530
(Valid at 23 degr. C after a 30 min. warm-up period.)
Frequency characteristics
Frequency range:
100 kHz to 3 GHz
Frequency generation:
TXCO with DDS
(Digital Frequency Synthesis)
Stability:
±1 ppm
Aging:
±1 ppm/year
Frequency resolution:
1 kHz (6
Center frequency range:
0 to 3 GHz
Tolerance of center frequency: ±1 kHz
Span setting range:
0 (zero span) and 1 to 3000 MHz
Amplitude characteristics
-110 dBm to +20 dBm
Display range:
Scaling, units:
10 or 5 dB/div, dBm, dBmV,
dBμV selectable
80 dB (10 dB/div), 40 dB (5 dB/div)
Dynamic range:
Amplitude frequency response (ATT 10 dB, zero span, 1 MHz-RBW signal
level –20 dBm):
±3 dB
8 cm x 10 cm
Display (CRT):
Display chracteristic:
logarithmic
Display units:
dB (dBm, dBmV, dBμV)
0 to 50 dB in 10 dB increments
Input attenuator:
Tolerance:
±2 dB, referred to 10 dB
Maximum continuous input level:
Attenuation 10 to 50 dB:
+20 dBm (0.1 W)
Attenuation 0 dB:
+10 dBm
Maximum input dc voltage:
±25 V
Reference level:
Adjustment range:
-110 dBm to +20 dBm
Tolerance (1500 MHz, ATT 10
dB, Zero Span, RBW 1 MHz): ±1 dB
Min. average noise level (RBW 9 kHz):
150 kHz – 1.5 MHz:
-90 dBm
1.5 MHz – 2.6 GHz:
-100 dBm
2.6 GHz – 3.0 GHz:
-90 dBm
3rd order intermodulation:
2 signals of –33 dBm each,
frequency difference › 3 MHz: › 75 dBc
2nd order harmonic distortions (2nd harmonic at a signal level of -30 dBm,
ATT 0 dB, frequency difference › 3 MHz): › 75 dBc
Bandwidth dependent frequency response amplitude tolerance (relative
to RBW 1 MHz, zero span):
±1 dB
Digitization:
±1 Digit (0.4 dB) at 10 dB/div
scaling (average, zero span)
Marker/Deltamarker
Frequency resolution:
span/2000, max. 1 kHz, 61⁄2-digit
Frequency accuracy:
± (1 kHz + tolerance of center frequency
+ 0.02% x span)
Amplitude resolution:
0.4 dB, 31⁄2-digit
Bandwidths
Resolution bandwidths (RBW) at –6 dB: 1 MHz, 120 kHz, 9 kHz
Videobandwidth (VBW):
50 kHz, 4 kHz
with automatic selection of sweep time: 40, 80, 160, 320 und 1000 ms
Inputs/Outputs
N connector
Measuring input:
50 Ω
Input impedance:
typ. 1.5 : 1
VSWR (ATT 10 dB):
1
⁄
-digit readout)
2
N connector
Testsignal output:
50 Ω
Output impedance:
Frequency:
50 MHz ±1 kHz
Level:
-10 to 0 dBm in 0.2 dB increments
±3dB @ 0dBm
Accuracy of level:
Supply voltage for field probes: 6 V
Audio output (PHONE):
3.5 mm jack
RS-232 interface:
9-pin. sub-D
External trigger input:
BNC connector
Digital signal:
Low level:
0 to +0.8 V
High level:
+2.5 V to +5.0 V
Functions
Keyboard input:
Center frequency, span, start frequency,
stop frequency, marker, delta marker,
reference level, test signal level
Rotary encoder input:
Center frequency, span, start frequency,
stop frequency, marker, delta marker,
reference level, test signal level intensity,
focus, trace rotation, volume
MAX HOLD:
Peak detection
Averaging
AVG (average):
memory depth 2 k x 8 Bit
Reference spectrum:
SAVE/RECALL:
Storage and recall of up to
10 instrument settings
for the PHONE output
AM demodulation:
REMOTE:
Display of remote/local control
via RS-232 interface
Readout:
8 parameter display fields, display of key-
board inputs
Miscellaneous
Display (CRT):
D 14-363GY, 8 cm x 10 cm internal graticule
Acceleration voltage:
approx. 2 kV
Trace rotation:
adjustable on front panel
Ambient temperature range: +10 to +40 °C
Storage temperature:
- 40 to +70 °C
Power supply:
105 to 254 VAC, 50 to 60 Hz,
approx. 37 W CAT II
Safety class:
I (EN/IEC 61010-1) with protective earth
Dimensions (W x H x D):
285 x 125 x 380 mm Adjustable handle, as
a tilt-stand or for convenient carrying
Weight:
approx. 6.5 kg
Accessories supplied: Line cord, manual, CD-ROM, HZ21 Adapter N male to
BNC female
Optional accessories:
HO720 Dual-Interface USB/RS-232
HZ70 Opto-Interface (with optical fiber cable)
HZ520 Antenna
HZ540/550 Near Field Probe sets
HZ560 Transient Limiter
HZ575 75 /50 -Ω-converter
S p e c i f i c a t i o n s
, max. 100 mA (2.5 mm jack)
DC
Subject to change without notice
29
Advertisement
Chapters
Table of Contents
