Uninstalling The Driver - Siemens CP 1612 A2 Operating Instructions Manual

Installing the software

Uninstalling the driver

Uninstalling after using the communications processor with SIMATIC NET PC
software
The driver is uninstalled automatically when you uninstall the
"SIMATIC NET, PC Software" CD or STEP 7.
NOTICE
The procedure recommended here uninstalls the entire SIMATIC NET PC software
on the computer not only the driver for the communications processor.
Note
Further information on uninstalling
When uninstalling STEP 7, read the following notes in German or English:
http://support.automation.siemens.com/ww/view/de/189025
http://support.automation.siemens.com/ww/view/en/189025
28
A5E01169863-01, Release 04/2009
CP 1612 A2