Approvals And Certificates - Siemens CP 1612 A2 Operating Instructions Manual

Approvals and certificates

Approvals and certificates
Electromagnetic compatibility
The SIMATIC NET product meets the requirements of the EC Directive:
2004/108/EEC "Electromagnetic Compatibility"
The communications processor is designed for use in the following areas:
Area of application
Residential area, business
and commercial
operations, and small
businesses
Industrial area
Installation guidelines
The products meet the requirements if you adhere to the installation and safety
instructions contained in this chapter "Approvals and certificates" and in the
"SIMATIC NET, Industrial Ethernet Network Manual" during installation and
operation.
EC Declaration of Conformity
You will find the EC Declaration of Conformity for this communications processor on
the Internet at the following address:
http://support.automation.siemens.com → section Self-help; enter "EC Declaration of
Conformity" and the product name ;
Example German: "EG-Konformitätserklärung CP 1612 A2",
Example English: "Declaration of Conformity CP 1612 A2".
Machinery directive
Communications processors are not machines in the sense of the EC Machinery
Directive 2006/42/EEC. There is therefore no declaration of conformity relating to the
current version of the EC Machinery Directive 2006/42/EEC for these products.
If the products are part of the equipment of a machine, they must be included in the
declaration of conformity procedure by the manufacturer of the machine.
30
Emission
EN 61000-6-3
EN 61000-6-4
Requirements
Immunity
EN 61000-6-1
EN 61000-6-2
A5E01169863-01, Release 04/2009
CP 1612 A2