Installing The Cp 1411 Driver; General Information - Siemens SIMATIC NET CP 1411 Installation Instructions Manual

3

Installing the CP 1411 Driver

3.1

General Information

Plug and Play The CP 1411 is designed for Plug and Play. For this reason, there are
no switches or jumpers on the module itself.
Capability
Windows 98 The Windows 98 operating system has Plug and Play capability and all
the hardware settings for the CP 1411 are made automatically.
Windows NT The CP 1411 driver for Windows NT makes all the hardware settings
for the CP 1411 automatically when the PC/programming device is
booted.
Windows 2000 The Windows 2000 operating system has Plug and Play capability and
all the hardware settings for the CP 1411 are made automatically.
Other Operating With other operating systems that do not have Plug and Play capabil-
Systems without ity, for example DOS or Windows for Workgroups, the hardware set-
tings described below must be made using the AMINSTAL program.
Plug and Play
This program is shipped on the installation diskette.
Drivers If you want to install drivers for the CP 1411 communications proces-
sor, these are located on the installation diskette.
Installationsanleitung CP 1411
C79000-Z8974-C24-05
All manuals and user guides at all-guides.com
Installation Instructions CP 1411
33