MSA Ultima OPIR-5 Quick Start Manual page 2

Ultima OPIR-5 Open Path Gas Transmitter
Quick Start Guide
3. Field Terminations – Receiver (Relays Energised)
4. Applying Power to the Detector
Immediately following power-up, the instrument will carry out this sequence on the display:
Display Duration
000 1 sec
8.8.8 1 sec
3 sec
2.01 2 sec
SU 120 sec
0
NOTE: Once the unit has powered up correctly refer to section 3.7.3 of ULTIMA OPIR-5 manual for
correct alignment and operation of the unit. If you have any problems in the setup or testing of the
detector, please refer to the "Troubleshooting Section", or call the factory direct.
The instrument is now ready to operate. Please consult the manual for more information on the
instrument's many features.
GB
ULTIMA OPIR-5 Receiver with cover removed
Description
Display Test
Software version
The analogue output will be at 4.0 mA.
Start up
MANOPIR5-QG/01