MSA EVOLUTION 5000 Operation And Instructions Manual
Wireless video transmission system
Hide thumbs
Also See for EVOLUTION 5000:
- Instruction manual (132 pages) ,
- Manual (83 pages) ,
- Manual (64 pages)
Related Manuals for MSA EVOLUTION 5000
Summary of Contents for MSA EVOLUTION 5000
- Page 1 EVOLUTION 5000 Transmitter Wireless Video Transmission System Operation and Instructions 10048454 / 00...
-
Page 2: Table Of Contents
Table of Contents Before Use / Description Battery Information Introduction Rechargable Batteries Features and Benefits Battery Installation and Care Before Use / Description Battery Maintenance About the Transmitter Caution Specifications Maintenance and Adjustments Warnings and Cautions General Maintenance Warning Cleaning Caution Caution Limitations... -
Page 3: Before Use / Description
MSA EVOLUTION 5000 Thermal Imaging the TIC. Transmitter. This handheld unit provides Approximate Height 210 mm, 8.5 in advanced technology backed by years of MSA Dimensions Width 140 mm, 5.5 in quality, dedication, and service. Length 120 mm, 5 in... -
Page 4: Warnings And Cautions
Warning and Cautions WARNING CAUTION The user must be trained and thoroughly Ensure that the battery is fully charged familar with the proper operation and before use. If not fully charged, the system limitations of the Transmitter. Use in will not operate for the specified amount of controlled exercises is suggested before time. - Page 5 The unit must be attached to the Attaching Transmitter EVOLUTION 5000 TIC. EVOLUTION 5000 TIC Place a fully charged battery inside the housing. Open the housing Fasten the TRANSMITTER to the EVOLUTION 5000 TIC housing Insert the fully charged battery Secure the antenna inside of the front handle of ...
-
Page 6: Channel Selection Button
Place transmitter housing onto Turning the system ON and OFF EVOLUTION 5000 connect Once the Transmitter is properly mounted to the TIC Transmitter via cable to the SMA video outlet of turn on the EVOLUTION 5000 TIC [see instructions ... -
Page 7: Battery Led / System Status
• To avoid inadvertent switching of the channels Channel LED [green] changes or shutdown, the green button One lit LED indicates channel 1 is selected. must be held for four seconds to turn OFF Two lit LEDs indicate channel 2 is selected. the Transmitter. -
Page 8: Caution
• batteries for damage or leakage Maintenance and Adjustments General Maintenance After each use, inspect • the Transmitter for structural, heat and / or chemical damage. • the mechanical hardware to ensure no screws are loose and no O-rings or gaskets are loose or misplaced. -
Page 9: Service
If your EVOLUTION 5000 Transmitter is in need of PARTICULAR PURPOSE: service or repair, please contact the MSA Service Exclusive remedy - It is expressly agreed that Center at 1-877-MSA-FIRE. purchaser´s sole and exclusive remedy for Describe the Problem to the representative as breach of the above warranty, for any completely as possible. - Page 10 MSA Factory Repair & Service Policy Card To help process your repair requests, please provide the following information: Please complete this form in full. Thank you Customer´s billing address: Customer´s shipping address: Company Name Company Name Street / P.O. Box Street / P.O.
-
Page 11: Ordering Information
Ordering Information Part number Description 10046340 EVOLUTION 5000 Transmitter 10041100 Charger, 110 / 220 VAC with cigarette lighter adapter 10038412 Lithium Ion battery 10046342 Replacement Strap 10048454 "Operation and Instructions" Manual 10048134 Receiver station w/ LCD-monitor 10048135 Receiver station w/o LCD-monitor... - Page 12 MINE SAFETY APPLIANCES COMPANY Manufactured by...
- Page 13 P I T T S B U R G H ; P E N N S Y L V A N I A ; U . S . A . 1 5 2 3 0...