MSA ICM Tx Installation Instructions

Hide thumbs Also See for ICM Tx:

Download this manual

ICM

TxR Units

INSTALLATION INSTRUCTIONS FOR MMR AIR MASKS

This instruction sheet must be read carefully by all persons who have or will have

the responsibility for using or servicing the product. Like any complex piece of

equipment, this kit from MSA will perform as designed only if it is used and serviced

according to the instructions. Otherwise, it could fail to perform as designed, and

persons who rely on this product could sustain serious personal injury or death.

The warranties made by MSA with respect to the product are voided if the product

is not installed, used, and serviced in accordance with the instructions in this

instruction sheet. Please read and observe the WARNINGS and CAUTIONS inside.

We encourage our customers to write or call for a demonstration of this equipment

prior to use, or for any additional information relative to use or repairs. Call 1-800-

MSA-2222 during regular working hours.

For More Information, call 1-800-MSA-2222 or Visit Our Website at www.MSAnet.com

The Safety Company

TAL 607 (L) Rev. 1

Tx and

Prnt. Spec. 10000005389(A)

Mat. 10067274

Doc. 10067274

Need help?

Do you have a question about the ICM Tx and is the answer not in the manual?

Page 1 Like any complex piece of equipment, this kit from MSA will perform as designed only if it is used and serviced according to the instructions. Otherwise, it could fail to perform as designed, and persons who rely on this product could sustain serious personal injury or death.
Page 2 SCBA is an MMR. For a full description of • 5/8” wrenches (2) the ICM Tx and TxR Units, please refer to the ICM Tx and • 9/16” wrench TxR Units and Nightfighter Heads-Up Display User’s •...
Page 3 TESTING AND USING THE INTEGRATED CONTROL MODULE Tether 1. To test the ICM Tx or TxR Units, press and hold the alarm button. The full PASS alarm should sound. a. Reset the alarm by pushing the side (reset) button twice.
Page 4 1662psi – 3 green LEDs g. One Red LED ON/OFF 1108psi – 2 amber flashing LEDs 3. Verify that the green light on the ICM Tx or TxR Units 530psi – 1 red flashing LED are slowly flashing. 6. If the ICM Tx or TxR Units and Nightfighter Receiver 4.

Icm txr