Viessmann VITOPEND 200 Installation And Service Instructions Manual page 58

Coding
Code 2
(cont.)
Coding in the delivered condition
91:0 No external heating pro-
gram changeover via
external extension (only
for weather‐compen-
sated control units)
95:0 Without Vitocom 100
communication inter-
face
97:0 The outside tempera-
ture of the sensor con-
nected to the control
unit is utilised internally
(only for weather‐com-
pensated control units)
98:1 Viessmann system
number (in conjunction
with monitoring of sev-
eral systems via Vito-
com 300)
9b:0 Minimum set boiler
water temperature for
external demand
58
Possible change
91:1 The external heating pro-
gram changeover affects
the heating circuit without
mixer
91:2 The external heating pro-
gram changeover affects
the heating circuit with
mixer
91:3 The external heating pro-
gram changeover affects
the heating circuit without
mixer and the heating cir-
cuit with mixer
95:1 With Vitocom 100 com-
munication interface
(automatic recognition)
97:1 Outside temperature is
accepted by the LON
BUS
97:2 The outside temperature
of the sensor connected
to the control unit will be
utilised internally and is
transmitted via the LON
BUS to any connected Vi-
totronic 050.
98:1 System number adjusta-
to ble from 1 to 5
98:5
9b:1 Minimum set boiler water
to temperature adjustable
9b:127 from 1 to 127 °C