Viessmann VITOPEND 200 Installation And Service Instructions Manual page 65

Code 2
(cont.)
Coding in the delivered condition
E1:1 With remote control:
The set day tempera-
ture is adjustable at the
remote control unit from
10 to 30 °C (only for
weather‐compensated
control units)
E2:50 With remote control: No
display correction for
the actual room tem-
perature (only for
weather‐compensated
control units)
E5:0 Without variable speed
external heating circuit
pump (only for weather‐
compensated control
units)
E6:100 Maximum speed of the
external variable speed
heating circuit pump:
100 % of the speed in
standard mode (only for
weather‐compensated
control units)
E7:20 Minimum speed of the
external variable speed
heating circuit pump:
20 % of the maximum
speed (only for weath-
er‐compensated control
units)
E8:0 Minimum speed in op-
eration with reduced
room temperature sub-
ject to the setting of
coding address "E7"
(only for weather‐com-
pensated control units)
Possible change
E1:0 Set day temperature ad-
justable from 3 to 23 °C
E1:2 Set day temperature ad-
justable from 17 to 37 °C
Display correction ‐5 K
E2:0
to to
Display correction ‐0.1 K
E2:49
E2:51 Display correction +0.1 K
to to
E2:99 Display correction +4.9 K
E5:1 With external variable
speed heating circuit
pump (automatic recogni-
tion)
E6:0 Maximum speed adjusta-
to ble from 0 to 100 %
E6:100
E7:0 Minimum speed adjusta-
to ble from 0 to 100 % of
E7:100 max. speed
E8:1 Speed subject to the set-
ting in coding address
"E9"
Coding
65