RED ROCKET-X INSTALLATION INSTRUCTIONS
CHAPTER 7:
SET UP RED ROCKET-X IN
REDCINE-X PRO
SET UP DECODING AND ERROR MESSAGE
PREFERENCES
1. Open REDCINE-X PRO
2. Click the RED ROCKET icon.
Figure: Click the RED ROCKET Icon
The Rocket Setup window opens. If the window does not open, ensure that both the RED ROCKET-X
®
REDCINE-X Pro
are installed.
3. To enable monitor out, click the Monitor Out icon.
4. Select the check boxes that apply to how you want to use the RED ROCKET-X:
Use for decoding
Show Rocket Error dialog on startup: Select this to display an error in the Status panel when the RED
ROCKET-X is installed in a lane slower than a x16 slot. For example, if your RED ROCKET-X is installed in a
Thunderbolt expansion chassis, you see this error because the majority of Thunderbolt expansion chassis do
not have x16 slots.
Figure: Select Check Boxes
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
®
.
®
and
9 5 5 - 0 0 3 3 , R EV - T
|
3 7